Insignia NS-RC4NA-14 User Manual

The Insignia NS-RC4NA-14 is a replacement remote control designed for various Insignia LCD LED TV models, featuring a standard layout with dedicated buttons for power, input selection, channel navigation, volume control, and menu access. It requires 2 AAA 1.5V alkaline batteries (not included). No programming or pairing required. Compatible with models such as NS-19ED200NA14, NS-22E400NA14, NS-24E400NA14, NS-32E2000A14, NS-39D400NA14, NS-46E440NA14, NS-50D400NA14, and more. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Safety Instructions 2. Features at a Glance 3. Battery Installation 4. First-Time Setup 5. Specifications 6. Button Functions 7. Maintenance 8. Troubleshooting

Safety Instructions

CAUTION! To reduce the risk of damage: Do not expose the remote to rain, moisture, or extreme temperatures. Avoid dropping or subjecting to physical shock. Do not use near water or heat sources. Keep away from children; do not allow ingestion of small parts or batteries. Unplug batteries during extended non-use to prevent leakage. Dispose of batteries properly according to local regulations. Refer servicing to qualified personnel if damaged. Avoid extreme temperatures, sunlight, humidity, water.

Features at a Glance

Key components: Infrared transmitter, ergonomic design, direct replacement for Insignia TVs, no programming required.

Feature	Description
Compatibility	Insignia LCD LED TVs (e.g., NS-19ED200NA14, NS-22E400NA14, NS-24E400NA14, NS-32E2000A14, NS-39D400NA14, NS-46E440NA14, NS-50D400NA14)
Power Source	2 x AAA 1.5V Alkaline Batteries
Control Type	Infrared (IR)
Buttons	Power, Input, Numbers, Menu, Navigation, Volume, Channel, Media Controls
Material	High-quality ABS
Other	Plug-and-Play, No Setup Required

Battery Installation

Prepare batteries: Use two AAA 1.5V alkaline batteries.

Locate the battery compartment cover on the back of the remote control.
Press down on the tab and slide the cover off.
Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
Slide the battery compartment cover back into place until it clicks securely.

CAUTION! Insert batteries correctly to avoid damage. Do not mix old and new batteries. Batteries not included.

First-Time Setup

This remote is plug-and-play. No programming needed for compatible Insignia TVs.

Unpack the remote and install batteries as described.
Point remote at TV's IR sensor.
Press POWER to turn on/off.
Use buttons to control functions immediately.

Tip: Ensure clear line of sight (up to 33 feet) to TV. Functionality may vary by TV model.

Specifications

Dimensions: 6.69 x 1.98 x 0.82 inches (approximately)
Weight: 2.08 oz (without batteries)
Power: 2 x AAA 1.5V Batteries
Range: Up to 33 feet
Material: ABS Plastic
Color: Black
Supported Devices: 1 (Insignia TV)

Button Functions

Point remote at TV and press buttons as needed. Functionality may vary by TV model.

Button	Function
Power (Red Button)	Turns the TV on or off.
INPUT	Selects the input source (HDMI, AV, etc.).
0-9	Direct channel entry
MENU	Accesses the TV's main menu.
Navigation Arrows (Up, Down, Left, Right)	Navigates through menus and options.
ENTER	Confirms selections.
EXIT	Exits the current menu or screen.
INFO	Displays program information.
VOL +/-	Adjusts the volume level.
MUTE	Mutes or unmutes the TV audio.
CH ^/v	Changes channels up or down.
SLEEP	Sets the sleep timer.
FAVORITE	Accesses favorite channels.
MTS/SAP	Selects audio language or SAP.
PICTURE	Adjusts picture settings.
Media Playback Controls (Play, Pause, Stop, Rewind, Fast Forward, Skip)	Controls media playback functions.

Maintenance

Clean with soft, dry cloth. Avoid liquids or abrasives. Replace batteries when low. Remove batteries for long-term storage. Avoid drops, heat, humidity.

Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type.
Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage and corrosion. Store in a cool, dry place.
Avoid Damage: Do not drop the remote control or expose it to extreme temperatures, humidity, or direct sunlight.

CAUTION! Do not disassemble; store in cool, dry place.

Troubleshooting

Problem	Possible Cause	Solution
Remote not working.	Dead or incorrectly installed batteries.	Replace batteries with new AAA 1.5V alkaline batteries, ensuring correct polarity (+/-).
Remote range is poor.	Weak batteries; Obstruction between remote and TV; Remote sensor on TV is blocked.	Replace batteries. Ensure a clear line of sight to the TV's IR sensor. Remove any obstructions.
Specific buttons not responding.	Button stuck or damaged; Remote not compatible with all TV functions.	Check if the button is physically stuck. This remote is a direct replacement for NS-RC4NA-14 and should work for listed Insignia TV models. If issues persist, contact support.
Intermittent operation	Low battery; interference; too far from TV	Replace batteries; move electronics away; stay within 33ft range

Support: Contact retailer or visit NKF Store on Amazon for assistance. Covered by standard manufacturer's warranty.