Insignia NS-RC03A-13 User Manual

The Insignia NS-RC03A-13 is a replacement remote control designed for various Insignia LCD LED TV models, featuring a standard layout with dedicated buttons for power, input selection, channel navigation, volume control, and menu access. It requires 2 AAA 1.5V alkaline batteries (not included). No programming or pairing required. Compatible with models such as NS-32L240A13, NS-39D240A13, NS-42L260A13, NS-46E340A13, and more. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Safety Instructions 2. Features at a Glance 3. Battery Installation 4. First-Time Setup 5. Specifications 6. Button Functions 7. Maintenance 8. Troubleshooting

Safety Instructions

CAUTION! To reduce the risk of damage: Do not expose the remote to rain, moisture, or extreme temperatures. Avoid dropping or subjecting to physical shock. Do not use near water or heat sources. Keep away from children; do not allow ingestion of small parts or batteries. Unplug batteries during extended non-use to prevent leakage. Dispose of batteries properly according to local regulations. Refer servicing to qualified personnel if damaged. Avoid extreme temperatures, sunlight, humidity, water.

Features at a Glance

Key components: Infrared transmitter, ergonomic design, direct replacement for Insignia TVs, no programming required.

FeatureDescription
CompatibilityInsignia LCD LED TVs (e.g., NS-32L240A13, NS-39D240A13, NS-42L260A13, NS-46E340A13)
Power Source2 x AAA 1.5V Alkaline Batteries
Control TypeInfrared (IR)
ButtonsPower, Input, Numbers, Menu, Navigation, Volume, Channel, Media Controls
MaterialDurable ABS
OtherPlug-and-Play, No Setup Required

Battery Installation

Prepare batteries: Use two AAA 1.5V alkaline batteries.

  1. Locate the battery compartment on the back.
  2. Slide open the cover.
  3. Insert batteries, matching + and - terminals.
  4. Slide cover back until it clicks.

CAUTION! Insert batteries correctly to avoid damage. Do not mix old and new batteries. Batteries not included.

First-Time Setup

This remote is plug-and-play. No programming needed for compatible Insignia TVs.

  1. Unpack the remote and install batteries as described.
  2. Point remote at TV's IR sensor.
  3. Press POWER to turn on/off.
  4. Use buttons to control functions immediately.

Tip: Ensure clear line of sight (up to 33 feet) to TV. Functionality may vary by TV model.

Specifications

Button Functions

Point remote at TV and press buttons as needed. Functionality may vary by TV model.

ButtonFunction
PowerTurns TV on/off
VIDEO / HDMI / ACCSelects input sources
0-9Direct channel entry
MENUAccesses TV menu
Navigation PadNavigates options (Up/Down/Left/Right/ENTER)
HOMEReturns to home screen (if supported)
EXITExits menu/screen
INFODisplays program/input info
INPUTCycles inputs
CH-LIST / FAVORITE / CCDModel-specific functions
VOL +/-Adjusts volume
MUTEMutes audio
CH Up/DownChanges channels
SLEEP / ZOOM / MTS/SAP / PICTURE / AUDIOAccesses settings/features
Play/Pause/Stop/Rew/Fast Fwd/SkipMedia controls

Maintenance

Clean with soft, dry cloth. Avoid liquids or abrasives. Replace batteries when low. Remove batteries for long-term storage. Avoid drops, heat, humidity.

CAUTION! Do not disassemble; store in cool, dry place.

Troubleshooting

SymptomPossible CauseCorrective Action
Remote not workingDead/incorrect batteries; obstruction; IR emitter blocked/damaged; TV IR receiver blocked/damagedReplace batteries with correct polarity; remove obstructions; clean remote front; check TV IR receiver
Intermittent operationLow battery; interference; too far from TVReplace batteries; move electronics away; stay within 33ft range
Certain buttons unresponsiveButton stuck/damaged; function unsupportedPress button multiple times; check TV manual for support

Support: Contact retailer or visit NKF Store on Amazon for assistance. Covered by standard manufacturer's warranty.

Insignia NS-RC03A-13 User Manual © - All Rights Reserved 2025